Mock-Up: A/C Condenser & Front Bulkhead Fittings (October 15 - 16, 2012)

Today I mocked-up the A/C condenser.  Vintage Air did their homework here, as it fit perfectly.  No modifications required.  It attaches to the core support using the same bolt holes that will hold the radiator in.  

Here I am punching holes for the forward bulkhead fittings.  I will run the A/C lines and heater hoses inside the fender well.  They will exit here to the A/C compressor and water pump.  

View from backside of fender well.

Also, today we received our 3" exhaust system from Stainless Works.  This setup is intended for use with the Stainless Works LS headers.  I am running the DSE headers, so I'll have to modify them to connect.  Also the rear will have to be modified as well to clear the Quadralink rear suspension.  

Mock-Up: Gas Tank (October 14, 2012)

Today I mounted the Rick's stainless steel gas tank.  I modified the forward portion of the mounting straps.  I didn't like the way the straps did not hug the front of the tank.  I cut off the loop and added these angles.  I then added studs for these to attach to, which will allow the straps to stay tight against the front of the tank.

The long studs in the back are for mock-up only.  Appropriate length studs will be used for final assembly.  

Here you can see the modified strap mounting.

Forming the straps to fit the tank.