Today our tires came in so we had them mounted and balanced on the wheels.
Vintage Wheel Works V-40's:
18" x 9-1/2" (5" backspace) - front
18" x 11" (5-1/2" backspace) - rear
Falken Azenis AT615K Tires:
265/35R18 - front
315/30R18 - rear
She's a roller now!
Built these blocks, inspired by DSE's project pics.
A full 15" above the floor...lots of room to work now!
Today we received the engine!!! GMPP LS3 480. This is the 430 hp production Corvette engine with a hot cam.
Don't need the exhaust manifolds
Today we installed the downbars on the front end. DSE quality is second to none. This stuff is awesome!!! Dig the "Made In America" sticker.
Today we started the front end mock-up.
Time for brakes - these are C6 Z51 brakes as well.
Today I took off the right side brakes that I put on yesterday, cut down the studs on both axles and put on the brakes on both sides.
I started with the caliper being mounted towards the front, but...
Internal Parking Brake
Once I went to mount the parking brake cable bracket, I discovered that the caliper had to be mounted toward the rear in order for the parking brake cable to pull towards the front.
Right side complete
On to the left side
Left side complete