Today I mounted the brake and clutch pedals.
The forward part of the brake/clutch pedal mount attaches to the firewall in the original location, except that the reinforcement I made in the previous post is sandwiched between the firewall and the pedal mount. The clutch master cylinder will also attach to the reinforcement/firewall.
Here's the interior view of the clutch master cylinder attachment. I used a shoulder bolt to attach the push rod to the clutch pedal. I have 2 holes drilled in the clutch pedal, one will give a 5:1 ratio and the other will give a 6:1.
The driveshaft arrived today so we did a test fit.
Fits perfect!
No comments:
Post a Comment