Nothing to complicated here. Installing the Dynamat Xtreme to the floor and rear seat bulkhead. I like to use paper to make templates then transfer to the dynamat. For me that is a lot cleaner than trying to wrestle and trim this stuff in place. Started at the rear. Get yourself a couple of inexpensive moving blankets. Much nicer than the hard floor with all kinds of things protruding that you don't want poking you! Plus you don't want to put your knees and elbows on the finished work. It will leave dents!
I was a couple of pieces short so I had to get more. The new stuff is black.... not a problem as it will all be covered with Dynaliner.
1/4" Dynaliner. Same process, but this stuff stretches and molds a lot easier than the Dynamat! Just to do my own unscientific testing, I fired up the engine after the dynamite went in, a definite improvement over bare floors. And again after the Dynaliner, a dramatic difference!
Total install time for both the Dynamat and the Dynaliner = 24 hours
How much Dynaliner did you use on your floorboards to firewall?
ReplyDelete