Here are the details on the glove box switch panel:
The panel will house momentary push buttons for the Phantom ignition (1) and the Dakota VHX instrument cluster (2). And for the cooling fan controller a temp adjustment potentiometer and indicating LED.
A side note - this is the pile of wire left over from basically rebuilding the various harnesses. If the harnesses had been installed as received, most all of this wire would have been stuffed in somewhere. I wanted more of a purpose built harness specifically for this project where everything is incorporated rather than scabbed together. It took me about 3 weeks of evenings and weekends but it came out really nice.
No comments:
Post a Comment