This is the Digi-Tails LED dome light kit. The led array attaches to the dome light bezel with two sided tape. In as delivered form, you use the factory screw holes to attach the bezel to the roof brace. But to use those holes you have to first screw the bezel in place then stick the array on. So if you had to remove the bezel you would have to peel the array off. So I drilled an extra hole at the front and used the slotted hole at the rear. Drilled new holes to match in the roof brace. This way the array can stay in place. I added a connector to the leads to make installing the headliner a bit easier.
No comments:
Post a Comment