Tuesday, July 30, 2013

Wiring - Deutsch Bulkhead Connectors, Part 2 (July 13 - 14, 2013)



This is the cabin side of the bulkhead connectors.

     

Same process as the engine side except for female pins.














This is the harness with all of the pins crimped in place, ready to go into the receptacle.




During mock up I welded some studs at the top of the inside of the firewall for wire supports. This brace spans 2 of these studs and will mount an adele clamp to support the harness near the receptacles.












Installing the pins.






Driver's side complete.






On to the passenger side.






All pins installed.




This area is directly behind the HVAC unit.




No comments:

Post a Comment